<< Gypsums  |                |  Next>> |     

 

ZETA CAD-CAM

Type IV special gypsum studied specifically for Cad-Cam technology. Its unique composition allows for perfectly smoothe scanning of model surface areas, avoiding any harmful optical refractions. It is typically particularly resistant to compression and has a minimal level of expansion.

 

Technical features:

Colours: ivory

Mixing ratio:

20 ml. di H2O x 100 g. of powder

Mixing time:

manually 60''    into the mixer 30''

Working time:

8,5'

Final setting time:

12' (Vicat)

Removal time:

30'

Setting expansion (2 h.):

Max 0,10%

Compression resistance (1h):

Min. 50 MPa
Packaging:
cod.950/0.2            alum. bag.   Kg.    0,2
cod.950/1               alum. bag.   Kg.   1
cod.950/3               alum. bag.   Kg.   3
cod.950/5               plastic drum Kg.   5
cod.950/15             plastic drum Kg. 15
cod.950/25             plastic drum Kg. 25

 

-Safety data sheet Zeta Cad-Cam (.pdf)

 

 

WORKING INSTRUCTION

 Add the powder to the water. Mix by hand for 60 seconds or mechanically for 30 seconds at low speed. We recommend precision in water/powder ratio and to storage the product in dry and cool place. The containers must be closed properly.

WARNING

Do not add higher quantity of water than indicated. If the mixture results thick on the beginning, don’t add water. Use distilled water.