An
extra hard type IV gypsum, conforming to ISO 6873 norm with a low
expansion rate, used for construction of dies, total prostheses and
precision bases. Good fluency and smooth surfaces. It is compatible with
all impression materials.
Technical features:
Colours:
pink,
yellow
Mixing ratio:
22-23 ml. di H2O x 100 g. of powder
Mixing time:
manually 60'' into the mixer 30''
Working time:
6'
Final setting time:
8' (Vicat)
Removal time:
30'
Setting expansion (2 h.):
Max 0,10%
Compression resistance (1h):
Min. 45 MPa
PackagingHardenal Pink:
cod.20/0.2
Aluminium Bag Kg. 0,2
cod.20/1
Aluminium Bag Kg. 1
cod.20/3
Aluminium Bag Kg. 3
cod.20/12
Aluminium Bags (4 x Kg.3)
cod.20/5
Plastic Drum Kg. 5
cod.20/15
Plastic Drum Kg.15
cod.20/25
Plastic Drum Kg.25
cod.20/S25
Sacco Kg.25
PackagingHardenal Yellow:
cod.20/0.2GA
Aluminium Bag Kg. 0,2
cod.20/1GA
Aluminium Bag Kg. 1
cod.20/3GA
Aluminium Bag Kg. 3
cod.20/12GA
Aluminium Bags (4 x Kg.3)
cod.20/5GA
Plastic Drum Kg. 5
cod.20/15GA
Plastic Drum Kg.15
cod.20/25GA
Plastic Drum Kg.25
cod.20/S25GA
Sacco Kg.25
WORKING INSTRUCTION
Add the powder to the water. Mix by
hand for 60 seconds or mechanically for 30 seconds at low speed. We
recommend precision in water/powder ratio and to storage the product in
dry and cool place. The containers must be closed properly.
WARNING
Do not add higher quantity
of water than indicated. If the mixture results thick on the beginning,
don’t add water. Use distilled water.
