<< Gypsums  | <<Previous  |  Next>> |     

 

RESIN GYPS

Extra hard type IV gypsum, conforming to ISO 6873 norm ; fortified with synthetic resins, created for precision dies in fixed prostheses, thin dies and likewise for implant prostheses. Thanks to its high dimensional stability, resistance to abrasion and plasticity, there is no risk of chipping during the working. It is compatible with all impression materials.

 

Technical features:

Colours: ivory, apricot

Mixing ratio:

20 ml. di H2O x 100 g. of powder

Mixing time:

manually 60''    into the mixer 30''

Working time:

8,5'

Final setting time:

12'  (Vicat)

Removal time:

30'

Setting expansion (2 h.):

Max 0,10%

Compression resistance (1h):

Min. 50 MPa
Packaging Resingyps Ivory:
cod.908/0.2      Aluminium bag Kg.   0,2
cod.908/1         Aluminium bag Kg.   1
cod.908/3         Aluminium bag  Kg.  3
cod.908/5         Plastic drum       Kg.  5
cod.908/15       Plastic drum       Kg.15
cod.908/25       Plastic drum       Kg.25
Packaging Resingyps Apricot:
cod.908/0.2AB      Aluminium bag Kg.   0,2
cod.908/1AB         Aluminium bag Kg.   1
cod.908/3AB         Aluminium bag  Kg.  3
cod.908/5AB         Plastic drum       Kg.  5
cod.908/15AB       Plastic drum       Kg.15
cod.908/25AB       Plastic drum       Kg.25

-Safety data sheet Resin Gyps ivory (.pdf)

-Safety data sheet Resin Gyps apricot (.pdf)

 

 

 

WORKING INSTRUCTION

 Add the powder to the water. Mix by hand for 60 seconds or mechanically for 30 seconds at low speed. We recommend precision in water/powder ratio and to storage the product in dry and cool place. The containers must be closed properly.

WARNING

Do not add higher quantity of water than indicated. If the mixture results thick on the beginning, don’t add water. Use distilled water.