Ecogyps giallo

SELENOR

A hard type III gypsum used for antagonist models and flacks. Extra fine-grained it assures smooth surfaces. The model results dense and inalterable during use. It is compatible with all impression materials.

Technical features:

Colours:	yellow, pale blue, pink
Mixing ratio:	28-30 ml. di H₂O x 100 g. of powder
Mixing time:	manually 60''into the mixer 30''
Working time:	6'
Final setting time:	8' (Vicat)
Removal time:	30'
Setting expansion (2 h.):	Max 0,20%
Compression resistance (1h):	Min. 30MPa

Packaging Selenor Giallo (yellow):

cod.10/0.2 Aluminium bag Kg. 0,2

cod.10/1 Aluminium bag Kg. 1

cod.10/3 Aluminium bag Kg. 3

cod.10/12 Aluminium bag (4 x Kg.3)

cod.10/5 Plastic drum Kg. 5

cod.10/15 Plastic drum Kg.15

cod.10/25 Plastic drum Kg.25

cod.10/S25 Bag Kg.25

Packaging Selenor Azzurro (Blue):

cod.10/0.2AZ Aluminium bag Kg. 0,2

cod.10/1AZ Aluminium bag Kg. 1

cod.10/3AZ Aluminium bag Kg. 3

cod.10/12AZ Aluminium bag (4 x Kg.3)

cod.10/5AZ Plastic drum Kg. 5

cod.10/15AZ Plastic drum Kg.15

cod.10/25AZ Plastic drum Kg.25

cod.10/S25AZ Bag Kg.25

Packaging Selenor Rosa (Pink):

cod.10/0.2RA Aluminium bag Kg. 0,2

cod.10/1RA Aluminium bag Kg. 1

cod.10/3RA Aluminium bag Kg. 3

cod.10/12RA Aluminium bag (4 x Kg.3)

cod.10/5RA Plastic drum Kg. 5

cod.10/15RA Plastic drum Kg.15

cod.10/25RA Plastic drum Kg.25

cod.10/S25RA Bag Kg.25

WORKING INSTRUCTION

Add the powder to the water. Mix by hand for 60 seconds or mechanically for 30 seconds at low speed. We recommend precision in water/powder ratio and to storage the product in dry and cool place. The containers must be closed properly.

WARNING

Do not add higher quantity of water than indicated. If the mixture results thick on the beginning, don’t add water. Use distilled water.